Four years ago, my best friend/then-roommate and I rescued a little nightstand from the garbage room of our apartment building. I wish I’d taken some true before shots so that you could fully appreciate the pre-makeover ick-factor of this nightstand. Think duct-tape skid marks, strange pink goo, star-shaped stickers, and more scratches and dents than I care to count. It was bad. But it was free, and you can’t argue with that logic.

So it came to live in our apartment and spent the next four years harbouring some of my rarely-used serving pieces (i.e. Egg-shaped deviled egg platter which has since gone to greener Salvation Army pastures) and hidden under a rather threadbare tablecloth. In fact, when my husband and I were packing to move in November, I nearly threw it out. But Erick convinced me that it could be useful, even if we only ever used it in the storage room, so it came with us from downtown to our new house on Ile Perrot.

An uncharacteristically short time later, I decided that the moment had come to give it new life. I was inspired by pins like  this  and this so I went out to Canadian Tire and bought the  materials. This included a lot more stuff than it would if you were already an established homeowner with a basement full of DIY supplies. As a bonus, we were at Can Tire to buy paint for our bedroom makeover (more about that later), so I used some of the white glossy trim paint for the nightstand. It worked out really well, and I’m sure we’ll have some left over even after the bedroom trim is all prettied up.

The first step was to remove the door with a screwdriver. I also took off the metal tray-like top (which just sits over the rough wood top) and set it aside to be spray painted. I patched the holes left by the door hardware with some spackle (I know, I know, I should have used wood-filler, but I didn’t want to make a second trip to the hardware store).

DSC09712

Once the door was off, I sanded the nightstand down pretty thoroughly, so that I’d get a smooth paint finish. For this step I used our electric sander and boy, was that thing a God-send. Thank you, dad, for buying duplicates of all your tools and giving the leftovers to us!

Once I’d sanded her down I primed the whole thing with a coat of Premier primer/sealer.  After letting that dry, I painted three coats of glossy white paint on the outside and drawer, and two coats of “Blue Collar” on the inside. I was surprised it took three coats of white, but I think I was too stingy with the primer.

DSC09718

DSC09717

DSC09715

Then began the looonnnggg saga of spray-painting the top. A fiasco from start to finish. I’d already sanded it down the day that I sanded the stand, so it was ready to go (or so I thought). First, I tried hanging it up to spray it (covering the doors with a drop cloth of course). Well, the experienced DIY-ers (or anyone with even 10 minutes more of experience than me) is shaking their head at this point. Naturally, it dripped. So out came the sandpaper and off came the first coat of paint.

DSC09716

Now, you’d really think that I’d have figured out that I needed to prime it first, but the newbie in me was saying “primer is for sissies – you don’t need that stuff”.

After the second coat of white glossy spray paint, one part of the top was a grainy. I probably should have washed it down with water AND soap, as directed on the can. Again, the newbie in me was whispering “soap is for sissies – you don’t need that stuff”.

Long story short, the sandpaper supply is now severely depleted and the top is sprayed. It’s not the most even or perfect job you’ll encounter but it’s done and I just cannot put one more iota of time into that top.

Anyway, to get back to the real star of this show: the nightstand herself! I lined the inside of the drawer with some pretty paper I bought at Omer deSerres and I fitted it with a brand spanking-new oval knob, which I think just screams “look at how shiny and pretty I am!”

photo-11

nightstand final

Look at her, sitting there all dressed up.

Lessons learned: you don’t need half a gallon of accent paint for a small project like this… So what will I do with the rest? Also, you should always prime and prepare things properly. Or at least until you’ve screwed up enough times to know what will or (in my case) won’t work. Lastly, when you live in Canada, spray painting should really be done in the warmer, more air-circulatory months.

Budget Breakdown: 
Nightstand FREE (saved from the garbage)
Paint (Blue Collar by CIL) $25.00 (should have bought a trial pot)
Paint (White semi-gloss) N/A (purchased for our bedroom update)
Drawer Pull (Home Depot) $5.00
Drawer Lining Paper (Omer de Serres) $5.15
White spray paint (Rust-o-Leum) $8.00 
Total $43.15 
What do you think of my first DIY furniture upgrade? Please leave a comment to let me know!
Subscribe to Knotty News!
Sign up to receive the latest Flourish & Knot posts, as well as monthly newsletters full of subscriber-only goodies.
Flourish & Knot respects your privacy. Your email will never be shared. You may unsubscribe from the newsletter at any time.

0 comment on One nightstand…

  1. You can donate your paint on Freecycle or ask the Habitat for Humanity’s Montreal ReStore if they accept donations.

  2. You did a fine job on this one! Having seen it live, I can say it really adds a sweet country feel to the bedroom. Keep it coming!

  3. I just couldn’t go away your site before suggesting that I
    extremely loved the standard information a person supply to your visitors?
    Is going to be again steadily to inspect new posts

Leave a Reply

Your email address will not be published. Required fields are marked *